3, 9 or 12 hours on, then 21, 15 or 12 hours off, repeating daily
Mount
Clip-on
Power
USB powered, 8 V
Dispatch
Direct by the supplier
Shipping & returns
Tracked shipping anywhere in Canada. It is free on orders of $50 or more, and a flat $22 below that. Allow up to 7 working days in transit after dispatch within 2 working days.
Changed your mind? You can return it within 15 days of delivery, in its original packaging, with proof of purchase from this website. You send it back tracked, at your own cost, and the refund does not include the original shipping charge. Refunds are processed 24 to 48 hours after the return arrives.
If it arrives damaged, faulty, not as described or with parts missing, we put it right at no cost to you, return postage included. Nothing here limits your rights under the consumer protection law of your province or territory.
Two gooseneck headsFlexible necks aim light where you need it
Built-in timer3, 9 or 12 hours on, repeating daily
Three light modesRed, blue or full spectrum
10 brightness levelsDim for seedlings, brighter as plants grow
Clip-on mountClips onto a shelf, table edge or kit
About this product
A clip-on dual head LED grow light with a built-in timer
Two 37 cm flexible goosenecks, 40 LEDs, red, blue or full spectrum modes, 10 brightness levels and a 3, 9 or 12 hour timer. USB powered.
A dual head LED grow light with flexible goosenecks, so you can aim the light where your plants need it.
Two lamp heads share 40 LEDs and clip onto a shelf, table edge or hydroponic kit.
The built-in timer runs the light for 3, 9 or 12 hours a day and repeats daily.
Smart timer: set it for 3, 9 or 12 hours of light. It then switches off for 21, 15 or 12 hours and repeats each day.
Three light modes: red, blue or full spectrum. Plants use blue light mainly for leafy growth and red light for flowering. Full spectrum gives a broader light for general growth.
Ten brightness levels let you match the light to seedlings, leafy growth or flowering plants.
The clip-on mount holds onto a shelf, a table edge or the side of a kit, so the light stays where you put it.
The flexible goosenecks bend to aim each head where it is needed, so you can light a wider area. The light runs on USB power.
Still deciding?
Not sure yet? That is fine.
You can change your mind. Return it within 15 days of delivery, in its original packaging, with proof of purchase from this website; you send it back tracked at your own cost, and the refund does not include the original shipping charge.
If it turns up damaged, faulty, not as described or with parts missing, that is on us: tell us straight away and we put it right with a replacement or a refund, and we pay the return postage. Nothing we say limits your rights under the consumer protection law of your province or territory. Read the full detail on our refunds and returns page, or ask us anything before you order.
If you have any concerns with your order, please email our support team at theteam@nfthydroponics.shop with your order number and they will be glad to help. Most emails are answered within 1 business day.
How do I know if my order has been shipped?
Once your order is shipped, it will be marked as complete in our system and you will receive a confirmation email with a tracking number.
Do you have a shop location?
We are an online supplier, with no physical shop or premises. Selling online only keeps our running costs down, and that is reflected in our prices.
Do I get a receipt for my order?
You will be sent a receipt for your order by email after payment is made. You will also receive a confirmation email with a tracking number once your item has been shipped.
What are your shipping options and how long will it take?
Shipping across Canada is free on orders of $50 or more, and a flat $22 below that. We dispatch within 2 working days and delivery then takes up to 7 working days by tracked courier. Express Shipping is available on any order for $22.
What currency are the prices displayed in?
All of our prices are displayed in Canadian dollars (CAD).
Which payment methods are accepted?
We accept credit and debit cards through Stripe, and PayPal.
Does this have a USB connector in the power cord?
Yes. The light is USB powered, at 8 V.
Can this grow light stand up on its own without being clipped onto something?
No, it has to be clipped to something, such as a shelf, a table edge or the side of your kit.
How long will the LEDs last?
We do not have a rated life figure for this light. LEDs last longest when they are kept clean and dry and are not covered.
Are you supposed to remove the thin layer of plastic from the light before use?
Yes. If the heads arrive with a protective film, peel it off before use.
Does this plant grow light work well with fruits?
It suits most potted plants, flowers, herbs and indoor plants, including small hydroponic setups. It has red, blue and full spectrum modes and 10 brightness levels, so you can match it to what you grow.
How long is the power cord?
We do not have a cord length for this light. Plan to use it near a USB power source.
How do I get this to work on a timed cycle? I need 12h/12h.
Use the built-in timer. The 12 hour mode turns the light on for 12 hours and off for 12, repeating each day.
Is it good for starting vegetable seeds?
Yes, it works well for starting vegetable seeds, and for herbs and young plants.
Where does the gooseneck bend?
Each 37 cm gooseneck is flexible, so you can bend it to aim the head where you need it.
Will this light hurt my furniture?
It clips on, so there are no screws or holes. If the surface is delicate, put a soft cloth under the clip.
Will it increase my electric bill?
It is a small USB powered light. Your running cost depends on your electricity rate and how many hours a day you run it.
What is the gooseneck length?
Each gooseneck is 37 cm (14.5 in) long and flexible.
How many LEDs does it have?
40 LEDs across the two lamp heads.
What do the light modes do?
Plants use blue light mainly for leafy growth and red light for flowering. Full spectrum mode gives a broader light for general growth. Pick the mode that suits your plants.
How do I change the brightness?
Use the dimming control to step through the 10 brightness levels.
What do the timer modes do?
Choose 3, 9 or 12 hours. The light stays on for that time, then off for 21, 15 or 12 hours, and repeats at the same time each day.
How far above my plants should I place it?
Start a short distance above the plants, then adjust. Move it closer if seedlings stretch, and further away if leaves look scorched.
Can I use it with a small hydroponic setup?
Yes. It clips onto the side of a box or a nearby shelf, which suits small herb setups and seed trays such as our seed starter container.
Is it bright enough for a large NFT system?
It suits small setups. For our 36 or 108 cup kits, the LED grow light strips cover more area.
Does it get hot?
LEDs run cooler than older lamp types, but let the heads cool before you touch them and keep leaves from resting against them.
Can I use it for houseplants?
Yes, it works for houseplants and succulents that need extra light indoors.
What if the timer does not seem to switch at the right time?
The timer counts from the moment you set it, so set it at the time of day you want the light to come on.
Does it need a special power supply?
It is USB powered, at 8 V. A wall adaptor is not listed as included, so make sure you have a USB power source where you will use it.
The complete guide
Choosing and using a clamp-on LED grow light
6 min readHydroponics Company Canada
A small LED grow light is the simplest way to give indoor plants and seedlings the light a windowsill cannot. This dual head grow lamp clips onto a shelf, table or hydroponic kit and puts two adjustable light heads where you need them.
What you get
Two lamp heads with 40 LEDs between them.
Two flexible goosenecks, each 37 cm long.
A clip-on mount for a shelf, a table edge or the side of a kit.
A timer, 10 brightness levels and three light modes.
USB power, at 8 V.
Timer
The timer runs the light for 3, 9 or 12 hours, then switches it off for 21, 15 or 12 hours, and repeats each day from the time you set it. Use it with the brightness setting and the distance between lamp and plant to suit what you grow.
Red, blue and full spectrum
Blue light is used mainly for leafy growth, and red light supports flowering. Full spectrum gives a broader light for general growth. The three modes let you choose red, blue or full spectrum.
Ten brightness levels
Step through the 10 brightness levels to match seedlings, leafy growth or flowering plants. Start lower for young seedlings and turn it up as they grow.
Clip and gooseneck
The clip holds the light on a shelf or the edge of a table, and the flexible goosenecks turn the heads in any direction. That lets you cover a wider area and reach more plants.
Tips for using a grow light
If the heads arrive with a protective film, peel it off before first use.
Start a short distance above the plants and adjust. Move it closer if seedlings stretch, and further away if leaves look scorched.
Seedlings and leafy greens often want 12 to 16 hours of light a day. Check what your plants need.
Keep leaves off the heads, and let the heads cool before you handle them.
Tell us about your space and what you want to grow, and we will tell you which kit, light or tent fits before you buy. Free shipping across Canada on orders over $50.
Dual Head LED Grow Light (nfthydroponics.shop, Hydroponics Company Canada). A clip-on grow light with two lamp heads and 40 LEDs on 37 cm (14.5 in) flexible goosenecks; red, blue or full spectrum modes; 10 brightness levels; a built-in timer for 3, 9 or 12 hours on, then 21, 15 or 12 hours off, repeating daily; USB powered, 8 V. Dispatched direct by the supplier. Price CAD 37.49. Shipping across Canada is free on orders of CAD 50 or more, otherwise CAD 22.
